Cutting Fluids  3500+ by Peerless

A concentrated mixture of organic compounds combined with complex polymers in a stable, homogenous concentrate. While we offer this extraordinary product specifically for metal sawing, it performs extremely well on all machining and grinding applications.

• Concentrated (15 to 1 mixture), clear cutting and grinding fluid.
• For use in central systems or individual sumps.
• Low misting, low foaming.
• Non-nitrited, non-silicone or silicate, non-phenolic, non-halogenated
• Packaged in 1gal or 5gal containers that are easily shipped and handled requiring no fork truck.

SYNTHETIC COOLANT 3600-L

PRODUCT DESCRIPTION

A multi-purpose safety coolant for cutting and grinding ferrous and non-ferrous metals, ceramics, and carbide. This coolant is biodegradable, not offensive to machine operators, and an excellent product for spray mist applications.

TYPICAL USES

Milling, drilling, and turning at 20:1 dilutions.
All types of band sawing at 15:1 dilutions.
Spray mist at 33:1 dilutions.

FEATURES

Excellent cooling properties and corrosion protection.
Extended sump life; rejects tramp oil.
Clean and transparent for good visibility.
Safe to use; no nitrites, phenols, sulfur, or chlorine.

A super high efficiency lubricant system is available in liquid, paste, and block form. For use with Unist systems.

"This metal working lubricant replaces flood coolants and lubricants"
You get less reworking of parts because of exit burrs, oversize holes, and rough finishes. Tools stay sharper much longer and during extreme pressure this product really shines. Cleans up with warm water and soap solution. You can plate, paint or seal over a surface exposed to Coolube because it leaves such minimal residue.

Do away with costly coolant disposal charges.
Use drops instead of gallons and save.

Works Great On:Aluminum, Steel, Stainless Steel, Titanium, and many other exotic and non-exotic materials.

Advantages

Non-Toxic
Non-Polluting
Non-Drying
Non-Staining
Contains No Chlorinating Solvents
Permits Plating and Painting With No (or minimal) Clean-up
Seal Compatibility
Extreme Pressure Capability
Contains No Silicones
Contains No Petroleum Products
Extremely Cost Effective

Uses

COOLUBING WITH COOLUBE 2210EP

Description:

Coolube 2210EP is a premium quality vegetable based metalcutting lubricant. It is formulated to work with ferrous and non-ferrous metals.

Coolube 2210EP is ideally applied with UNIST's Uni-MAX precise fluid applicators. Coolube 2210EP is a polar lubricant and is most effective when applied sparingly. If it is applied correctly and the proper amounts are dispensed, Coolube 2210EP will yield the lowest net manufacturing cost of any fluid. Cost savings will be realized through longer tool life, increased productivity, lower shop maintenance costs, clean chips, clean parts and clean machines.

Physical and Chemical Properties:

Appearance: Clear, Colorless liquid
Weight Per Gallon: 7.8 +/- 0.1 pounds
Odor: Neutral
Water Solubility: Insoluble
Flashpoint: Greater than 400 degrees Fahrenheit (COC)

Coolube 2210EP will not oxidize or polymerize, i.e. become sticky or build up residue.

Coolube 2210EP will not stain aluminum, steel or brass. It will not normally stain during aluminum in heat treating, although testing is recommended.

Coolube 2210EP has an unlimited shelf life.

Usage:

Coolube 2210EP is used to lubricate ferrous and non-ferrous metals in the metalcutting process. In some cases, it is extremely effective in some woodfabricating processes.

Typical Usage For Light To Medium Machining Operation:

1 Drop Every 10 Seconds*
=450 to 600 drops per hour
=4.06 to 5.41 ounces (15 to 20 cubic centimeters) used in an eight hour continuous operation

This works out to $1.90 per 8 hour shift, or 23 to 32 cents per hour.

Coolube 2210EP when used properly produces dry chips, requires minimum machine clean-up and little or no part clean-up. Coolube 2210EP is compatible with all know materials. This eliminates the possibility of chemical attack to any base metal or material being used. In comparison, the average cost in a typical flood coolant operation includes:

2.5 to 5 gallons per minute for each nozzle
+5 cents per gallon maintenance cost (recycling & filtering)
+Shop maintenance and clean-up costs

<Back | Top | Home